 |
KG Metal Coatings & Lubricants
-
KG-1 Carbon Remover
KG-1 was initially
formulated for exclusive use by a military group to remove
carbon buildup from their weapons. Unlike other Cleaners,
KG-1 contains no ammonia and is pH neutral. KG-1 is ideal
for removing carbon from black powder rifles.
-
KG-2 Bore Restore
Originally developed
to maintain the bore integrity of sniper rifles, KG-2 is
being introduced to the public to provide shooters with a
product that will actually improve the condition of the bore
while cleaning it. Like KG-1, KG-2 contains no ammonia and
uses a mechanical method to remove the worst of copper, lead
and powder residue. KG-2 can be used when shooting numerous
rounds in between cleanings or as a bore conditioner for
those weapons needing extra care. KG-2 is an ideal product
for fire polishing (A technique finer than Fire Lapping).
-
KG-3 Cleaning Solvent & Degreaser
KG-3 is a
non-chlorinated ozone safe formula used to remove the
residue loosened by KG-1 and KG-2 and is also used for
cleaning and decreasing parts. KG-3 contains a special
formulation of fast drying, water-displacing solvents which
will rapidly cut through oil and grease, leaving no residue.
-
KG-4 Gun Oil
KG-4 was the only oil
to pass the original requirements set forth in Mil-L-63460D.
It is a blend of the finest lubricants available, and
contains no synthetics. With very low surface tension, KG-4
exhibits excellent lubrication and provides outstanding
corrosion protection. KG-4 has the added property of keeping
current firing residue in suspension which allows for easier
cleaning. KG-4 has been field tested for endurance using 50
caliber machine guns. Initially the 50s were experiencing
stoppages at 750 to 1000 rounds. After using KG-4 (CLP2) the
guns were fired and stopped at 6000 rounds due to heat and
to clean the weapons.
-
KG-5 Trigger Lube
KG-5 is a blend of
our Gun oil, thinned and sub-micron Teflon. The Teflon is
ground in a proprietary carrier and the added to the thinned
oil base. This blend has produced an excellent lubricant
especially for triggers. KG-5 provides excellent
lubrication, penetration and corrosion protection. KG-5 will
keep trigger pulls even and smooth.
-
KG-6 Moly Armorkote Bore Prep
Based on past and
recent test resutls KG-6 was developed to offer the
advantages of Moly to both reloaders and those who buy
factory ammo. KG-6 is unlike the greases you are used to
seeing. Formulated with Molybdenum Disulfide suspended in a
fine oil, our finished product is a superior lubricant, does
not need to be shaken and has an affinity for metal. KG-6 is
much easier to use than the grease products presently on the
market. KG-6 will embed a very thin film of Moly onto the
bore that will aid in less bore fouling. Most shooters today
are reporting 50 to 100 round strings without cleaning.
-
KG-7 Moly Armorkote Powder
KG Products is now
offering for sale the same Molybdenum Disulfide used in our
Bullet Kote, Gear Kote, and Gun Kote. This is simply the
best quality Molybdenum available on the market today. There
are only three grades of Molybdenum Disulfide: Technical
Grade, Technical Fine and Super Fine or what used to be
known as Suspension Grade. KG products uses only the finest
Suspension Grade or Technical Fine grades available. We have
to! Our coatings are used by some of the best racers and
gunsmiths around the world! Both Technical Fine and Super
Fine powders work in all tumbler applications
-
KG-8 Micro PTFE Dri Lube
THE DRY TEFLON - NO
MESS LUBRICANT. Teflon Dry Lube is new technology,
incorporating a highly effective P.T.F.E. �Teflon.� This new
technology grinds the Teflon Molecule to half of its
molecular weight creating a low surface tension lube. The
result produces a multi purpose lubricant which greatly
reduces friction and wear more effectively then the normal
Teflon. Use Teflon Dry Lube where a dry no-mess lubricant is
required, i.e. triggers, slides, etc. It is especially
useful for conceal and carry weapons where oil can be a
problem
|
|
|
